ABB IRB 6700 Series Product Manual page 376

4 Repair
4.5.4 Replacing the process turning disc
Continued
5
6
Concluding procedure
1
376
Action
IRB 6700 -200/2.60, -155/2.85.
Secure the process turning disc with its
attachment screws and washers.
IRB 6700 -300/2.70, -245/3.00.
Secure the process turning disc with its
attachment screws and washers.
Action
DANGER
Make sure all safety requirements are met
when performing the first test run. These
are further described in First test run may
cause injury or damage on page
© Copyright 2013 - 2018 ABB. All rights reserved.
Note
Tightening torque: 70 Nm
Attachment screws: M10x25, Steel 12.9
Gleitmo 603, (9 pcs)
Washers: (3 pcs)
Tightening torque: 70 Nm
Attachment screws: M10x25, Steel 12.9
Gleitmo 603, (21 pcs)
Washers: Steel 11x17x25 (21 pcs)
Note
26.
Product manual - IRB 6700
3HAC044266-001 Revision: N