ABB IRB 6700 Series Product Manual page 713

Loosening the cable brackets
Use this procedure to loosen required cable brackets.
1
2
Product manual - IRB 6700
3HAC044266-001 Revision: N
4.8.4 Replacing the axis-2 gearbox (IRB 6700 - 300/2.70, IRB 6700 - 245/3.00)
Action
If robot is equipped with DressPack:
• Open the two ball joint housings
from the lower arm and lift away the
cabling from the ball joint housings.
Unscrew the attachment screws that secure
the axis-2 lower arm metal clamp and the
axis-3 lower arm metal clamp located on
the inside of the lower arm by removing the
attachment screws.
Note
The screws are reached from outside the
lower arm.
© Copyright 2013 - 2018 ABB. All rights reserved.
Note
How to remove the DressPack cable pack-
age is described in more detail in the
product manual "IRB 6700 DressPack". For
article number see References on page
xx1400000195
xx1300000540
Continues on next page
4 Repair
Continued
10.
713