ABB IRB 6700 Series Product Manual page 491

7
8
Product manual - IRB 6700
3HAC044266-001 Revision: N
4.6.3 Replacing the rear bearings on the balancing device
Action
Apply flange sealant and refit the cover
plate on the back of the balancing device.
DANGER
Make sure all safety requirements are met
when performing the first test run. These
are further detailed in the section
run may cause injury or damage on
page 26.
© Copyright 2013 - 2018 ABB. All rights reserved.
Note
Screws: M10 quality 12.9.
Tightening torque: 50 Nm.
Flange sealant for conical fittings: Loctite
577.
xx1300000554
First test
4 Repair
Continued
491