ABB IRB 6700 Series Product Manual page 466

4 Repair
4.6.2 Replacing the balancing device
Continued
2
3
4
Attaching lifting accessory to the balancing device
1
Continues on next page
466
Action
Fit a locking screw M16x120 through the
hole for the lock screw in the frame and
into the lower arm (or using a lifting access-
ory or similar).
The lock screw is used to secure the weight
of the lower arm, in order to avoid acci-
dents or damage.
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
Remove any equipment, if fitted, on or
close to the balancing device.
Action
CAUTION
The weight of the balancing device (exclud-
ing cradle) is
140 kg (IRB 6700 -235/2.65, -205/2.80,
-175/3.05, -150/3.20, -200/2.60, -155/2.85)
185 kg (IRB 6700 -300/2.70, -245/3.00)
All lifting accessories used must be sized
accordingly.
© Copyright 2013 - 2018 ABB. All rights reserved.
Note
xx1200001116
Note
Product manual - IRB 6700
3HAC044266-001 Revision: N