ABB IRB 6700 Series Product Manual page 104

2 Installation and commissioning
2.7.2 Installing the motor cooling fan (option)
Continued
Required consumables
Consumable
Cable straps
Installing the cooling fan
Use these procedures to install the cooling fan.
Installing the fan
1
2
3
4
Continues on next page
104
Action
Move the robot to its synchronization position.
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot working
area.
Remove the metal sheet frame from the fan unit
assembly by loosening the six screws.
Loosen the two tightening screws so they don´t
damage the motor surface during installation.
© Copyright 2013 - 2018 ABB. All rights reserved.
Article number Note
-
Note
xx1800000157
xx1800000159
Product manual - IRB 6700
3HAC044266-001 Revision: N