ABB IRB 6700 Series Product Manual page 616

4 Repair
4.8.1 Replacing the axis-1 gearbox (IRB 6700 - 235/2.65, IRB 6700 - 205/2.80, IRB 6700 - 175/3.05, IRB
6700 - 150/3.20, IRB 6700 - 200/2.60, IRB 6700 - 155/2.85)
Continued
3
4
5
Continues on next page
616
Action
Check the o-ring.
Replace if damaged.
Make sure the o-ring is seated in the groove.
Tip
Lubricate the o-ring with some grease for a better
fitting in the groove.
If the motor is a new spare part, remove the cover.
© Copyright 2013 - 2018 ABB. All rights reserved.
Note
O-ring, 3HAB3772-107
xx1200001019
xx1200001020
xx1200001135
Product manual - IRB 6700
3HAC044266-001 Revision: N