General Notes On Applications - Lenze E84AVSC Operating Instructions Manual

8400 StateLine C | Operating instructions
Before commissioning

General notes on applications

5.3 General notes on applications
The technology applications integrated in the drive controller provide the main signal flow
for the implementation of a general or a special drive solution.
Technology application "Actuating drive speed"
This technology application preset in C00005 serves to solve speed-controlled drive tasks,
e.g. conveyor drives (interconnected), extruders, test benches, vibrators, travelling drives,
presses, machining systems, metering units.
"Switch-off positioning" technology application
This technology application to be selected in C00005 is used to solve speed-controlled
drive tasks which require a pre-switch off or stopping at certain positions, e.g. roller
conveyors and conveying belts.

Detailed information on each application can be found in the software manual
of the 8400 StateLine in the "Technology application" chapter.
Basic components of a drive solution
A drive solution consists of the following basic components:
 Signal inputs (for control and setpoint signals)
 Signal flow of the technology application
 Signal outputs (for status and actual value signals)
Signal
inputs
[5-4] Basic components of a drive solution
22
...
Switch-off positioning
Actuating drive speed
M
L
Setpoint Motion
generator Control
Kernel
ç è
n
Process
controller
Device Motor
control control
from Firmware V06.00 - DMS 1.1 EN - 11/2011
Signal
outputs
t
M