Timer Response-Timeout (Radius Scheme View); User-Name-Format (Radius Scheme View) - H3C S5120-SI Series Command Reference Manual

[Sysname-radius-radius1] timer realtime-accounting 51

timer response-timeout (RADIUS scheme view)

Syntax
timer response-timeout seconds
undo timer response-timeout
View
RADIUS scheme view
Default Level
2: System level
Parameters
seconds: RADIUS server response timeout period in seconds. It ranges from 1 to 10 and defaults to 3.
Description
Use the timer response-timeout command to set the RADIUS server response timeout timer.
Use the undo timer command to restore the default.
Note that:
If a NAS receives no response from the RADIUS server in a period of time after sending a RADIUS
request (authentication/authorization or accounting request), it has to resend the request so that
the user has more opportunity to obtain the RADIUS service. The NAS uses the RADIUS server
response timeout timer to control the transmission interval.
A proper value for the RADIUS server response timeout timer can help improve the system
performance. Set the timer based on the network conditions.
The maximum total number of all types of retransmission attempts multiplied by the RADIUS server
response timeout period cannot be greater than 75.
Related commands: radius scheme, retry.
Examples
# Set the RADIUS server response timeout timer to 5 seconds for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer response-timeout 5

user-name-format (RADIUS scheme view)

Syntax
user-name-format { keep-original | with-domain | without-domain }
View
RADIUS scheme view
2-27