Display Ip Extcommunity-List; Display Route-Policy - H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches

6.1.15 display ip extcommunity-list

Syntax
display ip extcommunity-list [ ext-comm-list-number ]
View
Any view
Parameters
ext-comm-list-number: Extended community list number, in the range of 1 to 199.
Description
Use the display ip extcommunity-list command to display BGP extended community
list information.
All BGP
ext-comm-list-number is specified.
Related commands: ip extcommunity-list, if-match extcommunity, apply
extcommunity.
Examples
# Display the information of BGP extended community list 1.
<Sysname> display ip extcommunity-list 1
Extended Community List Number 1

6.1.16 display route-policy

Syntax
display route-policy [ route-policy-name ]
View
Any view
Parameters
route-policy-name: Routing policy name, a string of 1 to 19 characters.
Description
Use the display route-policy command to display routing policy information.
All routing policy information will be displayed if no route-policy-name is specified.
Related commands: route-policy.
extended community
permit rt : 9:6
Chapter 6 Routing Policy Configuration Commands
list information
6-12
will be displayed if no