Display Ospf Interface - H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
LS UPD: Received less recent
LSA
LS UPD: Unknown LSA type

3.1.15 display ospf interface

Syntax
display ospf [ process-id ] interface [ all | interface-type interface-number ]
View
Any view
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
all: Display the OSPF information of all interfaces.
interface-type interface-number: Interface type and interface number.
Description
Use the display ospf interface command to display OSPF interface information.
If no OSPF process is specified, the OSPF interface information of all OSPF processes
is displayed.
Examples
# Display OSPF interface information.
<Sysname> display ospf interface
Area: 0.0.0.0
IP Address
192.168.1.1
Area: 0.0.0.1
IP Address
172.16.0.1
Field
OSPF Process 1 with Router ID 192.168.1.1
Interfaces
Type
PTP
Type
Broadcast
Chapter 3 OSPF Configuration Commands
Description
LSU packets without latest LSA
LSU packets with unknown LSA type
State Cost Pri
P-2-P 1562 1
State Cost Pri
DR 1 1
3-18
DR BDR
0.0.0.0 0.0.0.0
DR BDR
172.16.0.1 0.0.0.0