ADTRAN AOS Version R10.1.0 Command Reference Manual page 3186

Command Reference Guide
remark <remark>
Use the remark command to associate a descriptive tag with an extended Internet Protocol version 6
(IPv6) access control list (ACL). Use the no form of this command to remove the descriptive tag.
Syntax Description
<remark>
Default Values
By default, all AOS IPv6 security features are disabled, and there are no configured IPv6 ACLs.
Command History
Release 18.1
Usage Examples
The following example specifies a description for extended IPv6 ACL matchall:
(config)#ipv6 access-list extended matchall
(config-ext6-nacl)#remark "Allows all ip traffic from remote location."
60000CRG0-35E
Specifies a descriptive tag for the ACL. Tags can be up to 80 alphanumeric
characters enclosed in quotation marks. For example, "This list blocks all
outbound Web traffic."
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
IPv6 Access Control List Command Set
3186