ADTRAN AOS Version R10.1.0 Command Reference Manual page 3545

Command Reference Guide
dial-string source
Use the dial-string source command to set the Session Initiation Protocol (SIP) dialing string field of your
choice. Use the no form of this command to remove the specified setting. Variations of this command
include the following:
dial-string source request-uri
dial-string source to
Syntax Description
request-uri
to
Default Values
No default values are necessary for this command.
Command History
Release 13.1
Usage Examples
The following example enables the To header user field as the dial-string for this trunk:
(config)#voice trunk t01 type sip
(config-t01)#dial-string source to
60000CRG0-35E
Specifies the Request URI user field as the dialing string source.
Specifies the To header field as the dialing string source.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice SIP Trunk Command Set
3545