Command Reference Guide
num-packets <value>
Use the num-packets command to specify the number of packets to send and receive during a single probe
operation. Use the no form of this command to return to the default setting.
Syntax Description
<value>
Default Values
By default, the num-packets is set to 10.
Command History
Release 17.2
Usage Examples
The following example specifies sending 10 packets during the probe test:
(config)#probe probe3 twamp
(config-probe-probe3)#num-packets 10
60000CRG0-35E
Specifies the number of packets. Valid range is 1 to 1000 packets.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Network Monitor Probe Command Set
2952