ADTRAN AOS Version R10.1.0 Command Reference Manual page 3021

Command Reference Guide Router (RIP) Command Set
auto-summary
Use the auto-summary command to have Routing Information Protocol (RIP) version 2 summarize
subnets to the classful boundaries. Use the no form of this command to disable this summarization.
Syntax Description
No subcommands.
Default Values
By default, auto-summary is disabled.
Command History
Release 3.1 Command was introduced.
Functional Notes
Use this command if you are subdividing a classful network into many subnets and these subnets are to be
advertised over a slow link (64k or less) to a router that can only reach the classful network via the router
you are configuring.
Usage Examples
The following example configures the router to not automatically summarize network numbers:
(config)#router rip
(config-rip)#no auto-summary
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3021