ADTRAN AOS Version R10.1.0 Command Reference Manual page 2701

Command Reference Guide
vlan <vlan id> media ethernet
Use the vlan media ethernet command to set the virtual local area network (VLAN) media type to
Ethernet. Use the no form of this command to reset to the default setting.
Syntax Description
<vlan id>
Default Values
By default, vlan media is set to Ethernet.
Command History
Release 5.1
Usage Examples
The following example sets the media type of VLAN 2 to Ethernet:
(config)#vlan database
(vlan)#vlan 2 media ethernet
60000CRG0-35E
Specifies a valid VLAN interface ID. Valid range is 1 to 4094.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
VLAN Database Command Set
2701