ADTRAN AOS Version R10.1.0 Command Reference Manual page 3234

Command Reference Guide
connect fxs <slot/port>
Use the connect fxs command to connect a Media Gateway Control Protocol (MGCP) endpoint to a
physical foreign exchange station (FXS) port. Use the no form of this command to disconnect from the
physical FXS port.
Syntax Description
<slot/port>
Default Values
By default, the endpoint is not connected to a physical port.
Command History
Release A2
Functional Notes
This command fails if the specified FXS port is already in use on another MGCP endpoint or by a
configured voice user.
Usage Examples
The following example connects MGCP endpoint 1 to the physical FXS port 0/1:
(config)#voice mgcp-endpoint 1
(config-mgcp-1)#connect fxs 0/1
60000CRG0-35E
Specifies the slot and port to which the MGCP endpoint will connect. Slots
and ports are entered as follows: 0/1.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
MGCP Command Set
3234