Command Reference Guide
Voice Analog Trunk Command Set
blind-dial
Use the blind-dial command to allow calls to be placed without the presence of dial tone. Use the no form
of this command to disable blind dialing.
Syntax Description
No subcommands.
Default Values
By default, blind-dial is disabled.
Command History
Release 9.1
Command was introduced.
Usage Examples
The following example enables blind dialing:
(config)#voice trunk t01 type analog supervision loop-start
(config-t01)#blind-dial
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3448