Table of Contents
Advertisement
Command Reference Guide
rtp frame-packetization <value>
Use the rtp frame-packetization command to configure the Realtime Transport Protocol (RTP) frame
packetization time in milliseconds for individual Media Gateway Control Protocol (MGCP) endpoints.
Use the no form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, the rtp frame-packetization time is set to 20 milliseconds on all MGCP endpoints.
Command History
Release 9.3
Release 15.1
Release A2
Usage Examples
The following example sets the frame packetization time for MGCP endpoint 1 to 10 milliseconds:
(config)#voice mgcp-endpoint 1
(config-mgcp-1)#rtp frame-packetization 10
60000CRG0-35E
Configures the RTP frame packetization time value in milliseconds. Select
from 10, 20, or 30 milliseconds.
Command was introduced.
Command was added to the Voice Line Interface.
Command was added to the MGCP endpoint configuration.
Copyright © 2012 ADTRAN, Inc.
MGCP Command Set
3244
Advertisement
Table of Contents
