Table of Contents
Advertisement
Command Reference Guide
sip-identity
Use the sip-identity command to configure the Session Initiation Protocol (SIP) registration options for
the user. Use the no form of this command to disable the settings. Variations of this command include the
following:
sip-identity <station> <Txx>
sip-identity <station> <Txx> register
sip-identity <station> <Txx> register auth-name <username> password <password>
Syntax Description
<station>
<Txx>
register
auth-name <username> Optional. Sets the user name that will be required as authentication for
password <password>
Default Values
No default values are necessary for this command.
Command History
Release 12.1
Usage Examples
The following example specifies trunk T02 and extension 4400 for SIP identity:
(config)#voice ring-group 1234
(config-1234)#sip-identity 4400 T02
60000CRG0-35E
Specifies the station to be used for SIP trunk (e.g., station extension).
Specifies the SIP trunk through which to register the server. The trunk is
specified in the format Txx (e.g., T01).
Registers the user to the server.
registration to the SIP server.
Optional. Sets the password that will be required as authentication for
registration to the SIP server.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Ring Group Command Set
3424
Advertisement
Table of Contents
