ADTRAN AOS Version R10.1.0 Command Reference Manual page 3239

Command Reference Guide
name <text>
Use the name command to specify a textual name that the Media Gateway Control Protocol (MGCP) call
agent will use to refer to a specific endpoint. Use the no form of this command to return to the default
naming convention.
Syntax Description
<text>
Default Values
By default, when endpoints are created and given an index number, they are named in the following
format: aaln/x, where x is the index number. For example, an endpoint with an index of 4 will by default
have the name aaln/4.
Command History
Release A2
Usage Examples
The following example renames endpoint 1 as endpoint243:
(config)#voice mgcp-endpoint 1
(config-mgcp-1)#name endpoint243
60000CRG0-35E
Specifies the textual name of the MGCP endpoint.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
MGCP Command Set
3239