ADTRAN AOS Version R10.1.0 Command Reference Manual page 3000

Command Reference Guide
default-metric <value>
Use the default-metric command to set a metric value for redistributed routes. Use the no form of this
command to return to the default setting.
Syntax Description
<value>
Default Values
By default, default-metric value is set at 20.
Command History
Release 3.1
Functional Notes
The metric value defined using the redistribute command overrides the default-metric command's metric
setting. Refer to redistribute ospf on page 3031
Usage Examples
The following example shows a router using both Routing Information Protocol (RIP) and open shortest
path first (OSPF) routing protocols. The example advertises RIP-derived routes using the OSPF protocol
and assigns the RIP-derived routes an OSPF metric of 10.
(config)#router ospf
(config-ospf)#default-metric 10
(config-ospf)#redistribute rip
60000CRG0-35E
Sets the default metric value. Range is 0 to 4294967295.
Command was introduced.
for related information.
Copyright © 2012 ADTRAN, Inc.
Router (OSPF) Command Set
3000