ADTRAN AOS Version R10.1.0 Command Reference Manual page 3093

Command Reference Guide
association <name>
Use the association command to create, enable, and enter the configuration of an Ethernet operations,
administration, and maintenance (OAM) connectivity fault management (CFM) maintenance association
(MA). Use the no form of this command to remove the association and its association maintenance
endpoints (MEPs).
Syntax Description
<name>
Default Values
By default, no MAs exist.
Command History
Release 17.4
Functional Notes
For more information regarding Ethernet OAM CFM and its operation on AOS products, refer to the
Ethernet OAM CFM in AOS configuration guide available online at
(article number 3013).
Usage Examples
The following example enables and creates MA association1 from the Maintenance Domain (MD)
Configuration mode, and enters the MA Configuration mode:
(config)#ethernet cfm domain domain1 level 6
(config-ecfm-domain)#association association1
(config-ecfm-assoc)#
60000CRG0-35E
Specifies the name of the MA. Names can be up to 42 characters in length.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Ethernet OAM CFM Command Set
https://supportforums.adtran.com
3093