ADTRAN AOS Version R10.1.0 Command Reference Manual page 2697

Command Reference Guide VLAN Database Command Set
apply
Use the apply command to apply changes without exiting the virtual local area network (VLAN) database.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this setting.
Command History
Release 5.1 Command was introduced.
Functional Notes
Applies changes to the VLAN database configuration in the running configuration.
Usage Examples
The following example applies changes made, remaining in the VLAN database:
(config)#vlan database
(vlan)#apply
Changes applied.
(vlan)#
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2697