ADTRAN AOS Version R10.1.0 Command Reference Manual page 2908

Command Reference Guide
redistribute connected
Use the redistribute connected command to pass routes from one network to another, regardless of the
routing protocol implemented on the routing domain. Using the connected keyword allows the
propagation of routes connected to other interfaces using the Border Gateway Protocol (BGP) routing
protocol for either the Internet Protocol version 4 (IPv4) or Internet Protocol version 6 (IPv6) BGP address
family (AF) on either the default or nondefault VPN routing and forwarding (VRF) instance. Use the no
form of this command to disable the propagation of the specified route type. Variations of this command
include:
redistribute connected
redistribute connected metric <value>
redistribute connected route-map <name>
Syntax Description
metric <value>
route-map <name>
Default Values
By default, this command is disabled.
Command History
Release 14.1
Release 18.3
Release R10.1.0
Functional Notes
The redistribute connected command can be used to specify the hop count for advertised routes for BGP
AF neighbors on either the default or nondefault VRF instance. If the behavior is to be created on a
nondefault VRF instance, the VRF instance must first be created using the command
route-distinguisher on page
the BGP settings for the VRF instance using the command
BGP Configuration mode. For example, to configure the IPv4 BGP characteristics for the nondefault VRF
instance RED1, enter the following commands:
(config)#vrf RED1 route-distinguisher ip 192.17.250.24:33
(config)#router bgp 100
(config-bgp)#vrf RED1
(config-bgp-vrf)#address-family ipv4
(config-bgp-vrf-ipv4)#
60000CRG0-35E
Optional. Specifies the hop count to use for advertising redistributed
connected routes in the BGP AF.
Optional. Specifies the route map filter to use for advertising redistributed
connected routes in the BGP AF.
Command was introduced.
Command was incorporated into Multi-VRF BGP functionality.
Command was expanded to include IPv6 functionality.
1460. Once you have created the nondefault VRF instance, you can configure
Copyright © 2012 ADTRAN, Inc.
BGP Address Family Command Set
vrf <name> on page 2877
vrf <name>
from the router's
2908