Table of Contents
Advertisement
Command Reference Guide
MEF EVC Map Command Set
connect discard
Use the connect discard command to specify that traffic matching the Ethernet virtual connection (EVC)
map criteria is discarded. Using the no form of this command disables traffic discard.
Syntax Description
No subcommands.
Default Values
By default, no traffic is discarded.
Command History
Release A4.01
Command was introduced.
Usage Examples
The following example specifies that traffic matching the criteria outlined in EVC map Map1 is discarded:
(config)#mef evc-map Map1
(config-evc-map-Map1)#connect discard
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3219
Advertisement
Table of Contents
