ADTRAN AOS Version R10.1.0 Command Reference Manual page 3008

Command Reference Guide
redistribute rip
Use the redistribute rip command to advertise routes from one protocol to another, regardless of the
routing protocol implemented on the routing domain. Using the rip keyword allows the propagation of
Routing Information Protocol (RIP) routes into open shortest path first (OSPF). It does not enable OSPF
on all interfaces. Use the no form of this command to disable the propagation of the specified route type.
Variations of this command include:
redistribute rip
redistribute rip metric <value>
redistribute rip metric-type <type>
redistribute rip route-map <name>
redistribute rip subnets
Syntax Description
rip
metric <value>
metric-type <type>
route-map <name>
subnets
Default Values
By default, this command is disabled.
Command History
Release 3.1
Release 10.1
Release 14.1
Functional Notes
Redistributing RIP routes imports routes learned via RIP into OSPF. RIP routes imported this way are not
covered by a network command.
60000CRG0-35E
Specifies advertising RIP routes using OSPF.
Optional. Specifies a metric value to be carried from one OSPF process to
the next (if no other value is specified).
Optional. Specifies a type 1 or type 2 external route as the external link
type. If not specified, the default is 2.
Optional. Specifies the route map filter to use for advertising redistributed
static routes in OSPF.
Optional. Specifies subnet redistribution when redistributing routes into
OSPF.
Command was introduced.
Subcommands were added.
Command was expanded to include the route map filtering.
Copyright © 2012 ADTRAN, Inc.
Router (OSPF) Command Set
3008