ADTRAN AOS Version R10.1.0 Command Reference Manual page 2976

Command Reference Guide
test timeout <value>
Use the test timeout command to set the timeout value associated with the Two-Way Active Management
Protocol (TWAMP) probe responder test session. Use the no form of this command to return to the default
value.
Syntax Description
<value>
Default Values
By default, the test session timeout is set to 900 seconds.
Command History
Release 17.6
Usage Examples
The following example sets the TWAMP probe responder's timeout interval to 7200 seconds:
(config)#probe responder twamp
(config-responder-twamp)#test timeout 7200
60000CRG0-35E
Specifies the timeout interval in seconds. Range is 1 to 65535.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Network Monitor Probe Responder Command Set
2976