ADTRAN AOS Version R10.1.0 Command Reference Manual page 3403

Command Reference Guide
codec
Use the codec command to specify the coder-decoder (CODEC) that is used for the audio of the paging
group. Use the no form of this command to return to the default. Variations of this command include:
codec g711alaw
codec g711ulaw
codec g722
codec g729
Syntax Description
g711alaw
g711ulaw
g722
g729
Default Values
By default, the CODEC for the paging group is set to G.729.
Command History
Release A2.04
Functional Notes
The default CODEC used by paging groups is G.729, and is recommended for bandwidth optimization.
Other CODECs can be used when a page initiator or recipient does not support G.729.
This codec command is not to be confused with the codec command used when creating CODEC lists
(refer to Voice CODEC List Command Set on page 3803
create a list of CODECs, nor can it be entered multiple times. This codec command, used when
configuring the voice paging group, specifies a single CODEC to be used by the paging group. If another
CODEC is entered from the Voice Paging Group Configuration mode prompt, it will override any previous
CODEC entries.
Usage Examples
The following example specifies the paging group using extension 8956 will use CODEC G.722 for audio:
(config)#voice paging-group 8956
(config-8956)#codec g722
60000CRG0-35E
Specifies the audio of the paging group is set to G.711 A-Law 64 kilobits per
second (Kbps).
Specifies the audio of the paging group is set to G.711 mu-Law 64 Kbps.
Specifies the audio of the paging group is set to G.722 8 Kbps.
Specifies the audio of the paging group is set to G.729 8 Kbps.
Command was introduced in the Voice Paging Group.
Copyright © 2012 ADTRAN, Inc.
Voice Paging Group Command Set
or codec on page 3804). This command does not
3403