ADTRAN AOS Version R10.1.0 Command Reference Manual page 2857

Command Reference Guide
permit <value>
Use the permit command to add an entry to the community list that allows only Border Gateway Protocol
(BGP) routes containing the specified community number in the community attribute. Use the no form of
this command to remove the statement from the community list.
Syntax Description
<value>
Default Values
No default values are necessary for this command.
Command History
Release 9.3
Usage Examples
The following example creates a community list named MyList to permit BGP routes that match the AS
path attributes 30:22:
(config)#ip as-path-list MyList
(config-as-path-list)#permit 30:22
60000CRG0-35E
Permits routes that contain this value in their community attribute. This is a
numeric value that can be an integer from 1 to 4294967295 or string in the
form aa:nn, where aa is the autonomous system (AS) number and nn is the
community number. Multiple community number parameters can be present
in the command.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
AS Path List Command Set
2857