ADTRAN AOS Version R10.1.0 Command Reference Manual page 2946

Command Reference Guide
destination
Use the destination command to specify the destination host name and port for the probe object. Use the
no form of this command to remove the setting. Variations of this command include:
destination <hostname>
destination <hostname> port <number>
destination <ip address>
destination <ip address> port <number>
The probe is not operational until a destination is defined.
Syntax Description
<hostname>
<ip address>
port <number>
Default Values
By default, there is no setting for this command.
Command History
Release 13.1
Usage Examples
The following example specifies www.adtran.com as the host and port 21 File Transfer Protocol (FTP) as
the destination for probe1:
(config)#probe probe1 http-request
(config-probe-probe1)#destination www.adtran.com port 21
60000CRG0-35E
Specifies the IP host by name.
Specifies a valid IP address. IP addresses should be expressed in dotted
decimal notation (for example, 10.10.10.1).
Optional. Specifies port number. This feature is not used with icmp-echo
probes. The valid range is 1 to 65535.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Network Monitor Probe Command Set
2946