ADTRAN AOS Version R10.1.0 Command Reference Manual page 3350

Command Reference Guide
Default Values
By default, no SIP headers are modified.
Command History
Release R10.1.0
Functional Notes
Multiple headers of the same type can occur in SIP messages, and therefore, the specified position of the
header can determine whether a match occurs. For more information, refer to Appendix B: Matching
Regular Expressions in SIP Messages with Multiples of the Same Header in the configuration guide
Manipulating SIP Headers and Messages in AOS, available online at
(article number 3526).
SIP headers available for matching include the following:
Accept-Contact
Call-Id
Content-Length
Event
Identity-info
Record-Route
Reject-Contact
Route
Sip-Status-Line
To
SIP headers can also be expressed in compact form in a SIP message. Compact forms of the header
name will match the full SIP header name.
If both the header and a match pattern are specified, the indicated SIP header must be present in the SIP
message and must contain the specified pattern for the rule to resolve as true. If only the SIP header is
specified, the SIP message must contain the specified SIP header for the rule to resolve as true.
60000CRG0-35E
Command was introduced.
Allow
Contact
Content-Type
From
P-Asserted-Identity
Refer-To
Replaces
Session-Expires
Subject
Via
Copyright © 2012 ADTRAN, Inc.
SIP HMR Command Set
http://supportforums.adtran.com
Allow-Events
Content-Encoding
Diversion
Identity
P-Preferred-Identity
Referred-By
Request-Disposition
Sip-Req-Uri
Supported
<name> (specifies
another header not listed
here)
3350