ADTRAN AOS Version R10.1.0 Command Reference Manual page 3060

Command Reference Guide
next-server <ipv4 address>
Use the next-server command to specify the Internet Protocol version 4 (IPv4) address presented in the
server IPv4 address (SIADDR) field in the Bootstrap Protocol (BOOTP) header of the DHCPOFFER
message. The next-server is generally the Trivial File Transfer Protocol (TFTP) server address that holds a
boot file for the Dynamic Host Configuration Protocol version 4 (DHCPv4) client. Use the no form of this
command to remove a configured next server.
Syntax Description
<ipv4 address>
Default Values
By default, no next server is defined.
Command History
Release 18.1
Functional Notes
This command specifies a different element of a DHCPOFFER message than that which is specified using
the tftp-server command.
Usage Examples
The following example specifies the IPv4 address presented in the SIADDR field of the BOOTP header of
the DHCPv4 offer packet:
(config)#ip dhcp pool MyPool
(config-dhcp)#next-server 192.168.1.1
60000CRG0-35E
Specifies the IPv4 address presented in the SIADDR field in the BOOTP
header of the DHCPOFFER message.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DHCPv4 Pool Command Set
3060