ADTRAN AOS Version R10.1.0 Command Reference Manual page 3463

Command Reference Guide
loop-disconnect time <value>
Use the loop-disconnect time command to specify the length of time a line must maintain a loop current
feed open (LCFO) state to qualify as a valid disconnection. Use the no form of this command to disable
this feature.
Syntax Description
No subcommands.
Default Values
The default loop-disconnect time is determined using the command
page 1444. The list below shows the default loop disconnect time (in milliseconds) for fully-supported
countries:
Australia
Belgium
Canada
ETSI
Ireland
Command History
Release A5.01
Functional Notes
Loop disconnect time is only configurable on ground start and loop start analog trunks.
Usage Examples
The following example configures the loop disconnect time for loop start trunk T01 as 500 ms:
(config)#voice trunk t01 type analog supervision loop-start
(config-t01)#loop-disconnect time 500
60000CRG0-35E
500 ms
200 ms
500 ms
200 ms
200 ms
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Analog Trunk Command Set
voice system-country <name> on
Mexico
Puerto Rico
United Arab Emirates
United Kingdom
United States
500 ms
500 ms
200 ms
200 ms
500 ms
3463