Table of Contents
Advertisement
Command Reference Guide
trunk-number <number>
Use the trunk-number command to define the call routing when direct inward dialing (DID) is disabled.
This feature directs incoming calls to the specified number when DID is not present. This command also
allows users to activate different system modes of operation that redirect incoming calls to a different
number depending on the specified mode. Use the no form of this command to disable this feature.
Variations of this command include:
trunk-number <number>
trunk-number no-number
trunk-number <system mode> <number>
trunk-number <system mode> no-number
trunk-number override <number>
trunk-number override no-number
Syntax Description
<number>
<system mode>
no-number
override
Default Values
No default values are necessary for this command.
Command History
Release 11.1
Release 15.1
Release A1
Usage Examples
The following example defines call routing on trunk T02:
(config)#voice trunk t02 type isdn
(config-t02)#trunk-number 4000
60000CRG0-35E
Specifies the number used for call routing when DID is disabled.
Optional. Specifies the system mode to configure. Choose from custom1,
custom2, custom3, lunch, night, or weekend. Refer to the command
voice system-mode on page 1445
Specifies no inbound calls are allowed on this trunk.
Ignores the programmed system mode schedule.
Command was introduced.
Command was added to the feature group D (FGD) trunk options.
Command was expanded to include the new subcommands.
Copyright © 2012 ADTRAN, Inc.
Voice ISDN Trunk Command Set
for more information on system modes.
3519
Advertisement
Table of Contents
