ADTRAN AOS Version R10.1.0 Command Reference Manual page 3537

Command Reference Guide
authentication username <username> password <password>
Use the authentication username password command to enable authentication security between the
Session Initiation Protocol (SIP) server and the unit. Each port that registers with the SIP server will use
the defined username and password. Use the no form of this command to return to the default setting.
Syntax Description
username <username>
password <password>
Default Values
By default, authentication is not enabled.
Command History
Release 9.3
Functional Notes
If all users on the trunk use the same user name/password, enter the user name and password for
authentication under the trunk. Otherwise, enter authentication information for each user individually in the
Voice User command set that overrides the setting of this command. Refer to
Command Set on page 3697
Usage Examples
The following example configures a user name of iaduser and password of totalaccess at the trunk level:
(config)#voice trunk t01 type sip
(config-t01)#authentication username iaduser password totalaccess
60000CRG0-35E
Specifies a string to be sent as the user name in authentication.
Specifies a string to be sent as the password in authentication.
Command was introduced.
for more information.
Copyright © 2012 ADTRAN, Inc.
Voice SIP Trunk Command Set
Voice User Account
3537