ADTRAN AOS Version R10.1.0 Command Reference Manual page 3228

Command Reference Guide
per
Use the per command to apply the Metro Ethernet Forum (MEF) policer policy to an Ethernet virtual
connection (EVC) component. Use the no form of this command to remove the policer policy from the
EVC component. Variations of this command include:
per custom add-map <name>
per custom remove-map <name>
per evc <name>
per uni mef-ethernet <slot/port>
Syntax Description
custom add-map <name>
custom remove-map <map>
evc <name>
uni mef-ethernet <slot/port>
Default Values
By default, no policer policies are applied to any EVC components.
Command History
Release A4.01
Functional Notes
When MEF policer policies are applied to an EVC, they are applied on egress traffic. When MEF policer
policies are applied to a MEF Ethernet interface, they are applied on ingress traffic.
Usage Examples
The following example applies MEF policer Policy1 to EVC map Map1:
(config)#mef policer Policy1
(config-policer-Policy1)#per custom add-map Map1
60000CRG0-35E
Adds the MEF policer policy to the named EVC map.
Removes the MEF policer policy from the named EVC map.
Applies the MEF policer policy to the named EVC.
Applies the MEF policer policy to the specified MEF Ethernet
interface (the user network interface (UNI)).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
MEF Policer Policy Command Set
3228