Table of Contents
Advertisement
Command Reference Guide
data
Use the data command to specify the data for padding a measurement packet. Payload data specifies the
data used to pad a measurement packet. Payload data can consist of all zeros pattern, a random pattern, or a
user-defined pattern. If the payload size is greater than the length of the pattern, the pattern will be
repeated. Use the no form of this command to return to the default setting. Variations of this command
include:
data pattern ascii <string>
data pattern hex <string>
data random
data zero
Syntax Description
pattern ascii <string>
pattern hex <string>
random
zero
Default Values
By default, the data pattern is set to zero.
Command History
Release 17.2
Functional Notes
This command can only be executed while in the probe <name> twamp and
probe <name> icmp-timestamp command set.
Usage Examples
The following example specifies a data pattern as random:
(config)#probe probe2 twamp
(config-probe-probe2)#data random
60000CRG0-35E
Specifies an ASCII data pattern.
Specifies a hexadecimal data pattern.
Specifies using a pattern of random numbers.
Specifies using a pattern of zeros.
Command was introduced to function with Two-Way Active Measurement
Protocol (TWAMP) and Internet Control Message Protocol (ICMP)
timestamp probes only.
Copyright © 2012 ADTRAN, Inc.
Network Monitor Probe Command Set
2944
Advertisement
Table of Contents
