ADTRAN AOS Version R10.1.0 Command Reference Manual page 2751

Command Reference Guide VLAN Interface Command Set
ip route-cache express
Use the ip route-cache express command to enable Layer 3 switching on the virtual local area network
(VLAN) interface. Use the no form of this command to disable Layer 3 switching on the interface.
Syntax Description
No subcommands.
Default Values
Layer 3 switching is disabled by default, except on the NetVanta 1544. Layer 3 switching is enabled by
default on the NetVanta 1544.
Functional Notes
Layer 3 switching cannot be disabled on the NetVanta 1544.
Enabling or disabling Layer 3 switching on the VLAN interfaces overrides the global Layer 3 switching
configuration.
For more information about Layer 3 switching, refer to the Layer 3 Switching in AOS configuration guide
available online at https://supportforums.adtran.com (article number 3070).
Command History
Release 17.5 Command was introduced.
Usage Examples
The following example enables Layer 3 switching on VLAN 200:
(config)#interface vlan 200
(config-intf-vlan 200)#ip route-cache express
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2751