ADTRAN AOS Version R10.1.0 Command Reference Manual page 3341

Command Reference Guide
SIP headers available for matching include the following:
Accept-Contact
Call-Id
Content-Length
Event
Identity-info
Record-Route
Reject-Contact
Route
Sip-Status-Line
To
SIP headers can also be expressed in compact form in a SIP message. Compact forms of the header
name will match the full SIP header name.
Usage Examples
The following example adds a new SIP header Proprietary1 to the SIP message from the HMR Message
Rule Configuration mode:
(config-rule-set-SET1)#message-rule RULE1 message-type any 5
(config-msg-rule-RULE1)#add header Propietary1 position first new-value
"localID=unit195;remoteID=unit272"
60000CRG0-35E
Allow
Contact
Content-Type
From
P-Asserted-Identity
Refer-To
Replaces
Session-Expires
Subject
Via
Copyright © 2012 ADTRAN, Inc.
SIP HMR Command Set
Allow-Events
Content-Encoding
Diversion
Identity
P-Preferred-Identity
Referred-By
Request-Disposition
Sip-Req-Uri
Supported
<name> (specifies
another header not listed
here)
3341