ADTRAN AOS Version R10.1.0 Command Reference Manual page 2980

Command Reference Guide Network Monitor Track Command Set
log-changes
Use the log-changes command to enable logging of status changes. When enabled, probe state transitions
are displayed (real time) on the terminal (or Telnet) screen. Unlike track debug commands, the
log-changes command appears in the running configuration and can be saved to persist through a unit
restart. Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, this feature is disabled.
Command History
Release 13.1 Command was introduced.
Usage Examples
The following example enables the logging of status changes:
(config)#track track1
(config-track-track1)#log-changes
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2980