ADTRAN AOS Version R10.1.0 Command Reference Manual page 3293

Command Reference Guide
set precedence <value>
Use the set precedence command to modify the precedence value (on matching packets) in the Internet
Protocol version 4 (IPv4) or Internet Protocol version 6 (IPv6) header to the specified value. For more
details on precedence, refer to the Technology Review section of the command
on page 3282. Use the no form of this command to discontinue the action from the quality of service (QoS)
policy map.
Syntax Description
<value>
Default Values
No default values are necessary for this command.
Command History
Release 17.2
Usage Examples
The following example sets the precedence value, for all matching traffic within the specified QoS map
entry, to 1:
(config)#qos map VOICEMAP 10
(config-qos-map)#set precedence 1
The following example removes all precedence value change requests from the QoS map entry:
(config)#qos map VOICEMAP 10
(config-qos-map)#no set precedence
60000CRG0-35E
Specifies the IP precedence numeric value. Valid range is 0 to 7 in
ascending order of importance.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Quality of Service Map Command Set
match precedence <value>
3293