Table of Contents
Advertisement
Command Reference Guide
coverage
Use the coverage command to configure call coverage parameters for members of this group. The call
coverage setting determines how a call is handled if the party dialed does not answer after a specified
number of rings. Use the no form of this command to remove an individual coverage parameter. Variations
of this command include:
coverage aa
coverage aa <number>
coverage internal <number>
coverage internal <number> num-rings <value>
coverage override aa
coverage override aa <number>
coverage override internal <number>
coverage override internal <number> num-rings <value>
coverage override vm
coverage override vm <number>
coverage vm
coverage vm <number>
coverage <system mode> aa
coverage <system mode> aa <number>
coverage <system mode> internal <number>
coverage <system mode> internal <number> num-rings <value>
coverage <system mode> vm
coverage <system mode> vm <number>
Syntax Description
<system mode>
aa
aa <number>
internal <number>
num-rings <value>
override
vm
vm <number>
Default Values
By default, no call coverage is specified.
60000CRG0-35E
Optional. Specifies the system mode to use for call coverage. Choose from
custom1, custom2, custom3, lunch, night, or weekend. Refer to the
Functional Notes of this command for more information on configuring
system modes.
Forwards the call to the default auto attendant.
Forwards the call to a specific extension programmed for the auto
attendant. If no extension is specified, the phone is forwarded to the default
auto attendant.
Forwards the call to the specified internal number.
Optional. Specifies the number of rings for the call before performing the
next action. Valid range is 1 to 9.
Ignores the programmed system mode schedule.
Forwards the call to voicemail.
Optional. Forwards the call to the specified mailbox number.
Copyright © 2012 ADTRAN, Inc.
Voice Operator Ring Group Command Set
3386
Advertisement
Table of Contents
