ADTRAN AOS Version R10.1.0 Command Reference Manual page 3022

Command Reference Guide
default-metric <value>
Use the default-metric command to set the default metric value for the Routing Information Protocol
(RIP). Use the no form of this command to return to the default setting.
Syntax Description
<value>
Default Values
By default, this value is set at 0.
Command History
Release 3.1
Functional Notes
The metric value defined using the redistribute command overrides the default-metric command's metric
setting. Refer to redistribute ospf on page 3031
Usage Examples
The following example shows a router using both RIP and open shortest path first (OSPF) routing
protocols. The example advertises OSPF-derived routes using RIP and assigns the OSPF-derived routes
a RIP metric of 10.
(config)#router rip
(config-rip)#default-metric 10
(config-rip)#redistribute ospf
60000CRG0-35E
Sets the default metric value in Mbps. Range is 1 to 4294967295 Mbps.
Command was introduced.
for related information.
Copyright © 2012 ADTRAN, Inc.
Router (RIP) Command Set
3022