ADTRAN AOS Version R10.1.0 Command Reference Manual page 3105

Command Reference Guide Ethernet OAM CFM Command Set
ccm-enabled
Use the ccm-enabled command to enable maintenance endpoint (MEP) continuity check message (CCM)
transmissions. Use the no form of this command to disable CCM transmissions on the MEP.
Syntax Description
No subcommands.
Default Values
By default, CCM transmissions are disabled.
Command History
Release 17.4 Command was introduced.
Functional Notes
Even when CCM transmissions are disabled, the MEP can still process received CCMs.
For more information regarding Ethernet operations, administration, and maintenance (OAM) connectivity
fault management (CFM) and its operation on AOS products, refer to the Ethernet OAM CFM in AOS
configuration guide available online at https://supportforums.adtran.com (article number 3013).
Usage Examples
The following example enables CCM transmissions on the MEP:
(config-eth 0/1)#ethernet-cfm mep Domain1 association1 100 down
(config-eth 0/1-mep)#ccm-enabled
(config-eth 0/1-mep)#
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3105