ADTRAN AOS Version R10.1.0 Command Reference Manual page 3459

Command Reference Guide
did digits-transferred <value>
Use the did digits-transferred command to define how many of the received digits should be sent to the
internal switchboard from an incoming call on a user role trunk. The number of digits transferred are the
least significant digits received. Direct inward dialing (DID) should be used if a Telco provider is
providing digits to the unit on inbound calls or if the unit needs to provide DID information to a piece of
customer premises equipment (CPE). Use the no form of this command to disable this feature. Variations
of this command include:
did digits-transferred <value>
did digits-transferred <value> prefix <number>
Syntax Description
<value>
prefix <number>
Default Values
No default values are necessary for this command.
Command History
Release 11.1
Functional Notes
User Role Example:
555-1000 is an incoming call on the trunk. With did digits-transferred <value> set to 4, the number 1000
will be sent to the switchboard. On a network role trunk, the did digits-transferred command allows you to
define how many of the digits from the Accept criteria should be sent externally from a call that was routed
by the switchboard. The number of digits transferred are the least significant digits received.
Network Role Example:
555-1000 is accepted on the universal time (UT) interface. With did digits-transferred <value> set to 4,
the number of 1000 will be sent to the device connected to the UT interface. This command cannot be
specified if and when trunk-number is being used. Conversely, if DID is used, trunk-number will not be
allowed.
Usage Examples
The following example transfers the digits 555-8000 and adds the prefix 256:
(config)#voice trunk t01 type analog supervision loop-start
(config-t01)#did digits-transferred 5558000 prefix 256
60000CRG0-35E
Specifies the number of digits to be transferred. Range is 1 to 16 digits.
Optional. Specifies a sequence of digits to be prepended to the digits that
will be transmitted. For example, if seven digits will be transferred via DID,
then prefix the seven digits with 256. Thus, 555-8000 would be prefixed
with 256, transmitting out the string of digits 256-555-8000.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Analog Trunk Command Set
3459