Table of Contents
Advertisement
Command Reference Guide
match ip precedence
Use the match ip precedence command to configure the route map to route traffic based on the
precedence value in the IP header of the packet. Use the no form of this command to discontinue matching.
Variations of this command include:
match ip precedence <value>
match ip precedence critical
match ip precedence flash
match ip precedence flash-override
match ip precedence immediate
match ip precedence internet
match ip precedence network
match ip precedence priority
match ip precedence routine
Syntax Description
<value>
routine
priority
immediate
flash
flash-override
critical
internet
network
Default Values
No default values are necessary for this command.
Command History
Release 11.1
Functional Notes
RFC 791 created a single octet (labeled type of service (ToS)) to help with the difficulty of trying to provide
quality of service (QoS) handling in IP networks.
60000CRG0-35E
Specifies matching the IP precedence (in numeric value). Valid range is
0 to 7 in ascending order of importance.
Specifies matching the IP precedence routine. (Numeric value of 0.)
Specifies matching the IP precedence priority. (Numeric value of 1.)
Specifies matching the IP precedence immediate. (Numeric value of 2.)
Specifies matching the IP precedence flash. (Numeric value of 3.)
Specifies matching the IP precedence flash-override. (Numeric value of 4.)
Specifies matching the IP precedence critical. (Numeric value of 5.)
Specifies matching the IP precedence internet. (Numeric value of 6.) This
level is reserved for internal network use.
Specifies matching the IP precedence network. (Numeric value of 7.) This
level is reserved for internal network use.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Route Map Command Set
3311
Advertisement
Table of Contents
