ADTRAN AOS Version R10.1.0 Command Reference Manual page 3216

Command Reference Guide
s-tag <vlan id>
Use the s-tag command to specify the virtual local area network (VLAN) ID used by the service provider
for the Ethernet virtual connection (EVC). This VLAN ID, the s-tag, is used by the carrier to mark
outbound traffic from this EVC in the Metro Ethernet network (MEN). Use the no form of this command
to return the s-tag value to the default.
Syntax Description
<vlan id>
Default Values
By default, the s-tag is 0, which indicates the traffic on the EVC is untagged.
Command History
Release A4.01
Usage Examples
The following example specifies the s-tag for traffic outbound on EVC DATA is 20:
(config)#mef evc DATA
(config-evc-DATA)#s-tag 20
60000CRG0-35E
Specifies ID of the service provider VLAN. Valid range is 1 to 4094.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
MEF EVC Command Set
3216