ADTRAN AOS Version R10.1.0 Command Reference Manual page 3688

Command Reference Guide
num-rings <value>
Use the num-rings command to specify the number of rings before the loopback account answers (when
called). Use the no form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, num-rings is set to 0.
Command History
Release 9.3
Release A1
Usage Examples
The following example sets the number of rings for loopback 5555 to 3:
(config)#voice loopback 5555
(config-LB-5555)#num-rings 3
60000CRG0-35E
Specifies the number of rings before answering. Specify 0 through 9 rings.
Entering 0 specifies answering the call immediately.
Command was introduced.
Command was included in the Voice Loopback Account Configuration
command set.
Copyright © 2012 ADTRAN, Inc.
Voice Loopback Account Command Set
3688