ADTRAN AOS Version R10.1.0 Command Reference Manual page 3614

Command Reference Guide
connect t1 <slot/port> tdm-group <number>
Use the connect t1 tdm-group command to specify the physical interfaces this trunk group will use for
voice connections. Refer to
division multiplexing (TDM) groups. Use the no form of this command to remove this association.
Syntax Description
<slot/port>
<number>
Default Values
By default, no physical interface is assigned.
Command History
Release 9.3
Usage Examples
The following example specifies that this trunk will use the level zero digital signals (DS0s) in TDM group 3
(on T1 interface 0/1):
(config)#voice trunk t01 type t1-rbs supervision wink role network
(config-t01)#connect t1 0/1 tdm-group 3
60000CRG0-35E
tdm-group <number> on page 1929
Specifies the slot/port for the T1.
Specifies the TDM group ID number.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice T1 Trunk Command Set
for more information on creating time
3614