ADTRAN AOS Version R10.1.0 Command Reference Manual page 2839

Command Reference Guide
accounting
Use the accounting command to enable remote authentication dial-in user service (RADIUS) accounting
for associations with this virtual access point (VAP) and specify update intervals. Use the no form of this
command to disable accounting for this VAP. Variations of this command include:
accounting enabled
accounting update
accounting update newinfo
accounting update periodic
accounting update periodic <value>
Syntax Description
enabled
update
newinfo
periodic
<value>
Default Values
By default, RADIUS accounting is disabled.
Functional Notes
The RADIUS server host, access point (AP) IP address, and IP gateway must be configured on the access
point for this feature to work. Refer to
mask> on page 2809, and
configuring these parameters.
Command History
Release 15.1
60000CRG0-35E
Enables RADIUS accounting on this VAP.
Defines the RADIUS accounting update setting. Executing the accounting
update command without specifying any further parameters will send
updates when new information occurs. This is the same as executing the
accounting update newinfo command.
Specifies sending RADIUS accounting records as they occur.
Specifies collecting accounting records and sending them periodically. The
default value is 5.
Optional. Specifies the number of minutes between periodic accounting
updates. Valid range is 1 to 99.
radius-server host on page
ip default-gateway <ip address> on page 2810
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
VAP Interface Command Set
2842, ip address <ipv4 address> <subnet
for more information on
2839